{"title":"Natural Wood Tar, Tar Oils, and Tar Paints","description":"\u003cheader\u003e\n\u003cp\u003eAuthentic Scandinavian and Baltic wood protection products. From pure wood tar to tar paint and oil – our products ensure longevity, antiseptic protection, and a natural, matte aesthetic. The perfect solution for facades, roofs, terraces, and garden furniture.\u003c\/p\u003e\n\u003c\/header\u003e","products":[{"product_id":"pine-wood-tar-a","title":"Claessons Furutjära - traditional Swedish pine tar for wooden facades and roofs","description":"\u003cp\u003e\u003cstrong\u003eNatural pine tar with a brown to dark brown hue — deeply penetrates wood, protects, and gives an authentic, classic appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFurutjära is a premium quality natural Swedish pine tar produced by \u003cem\u003eClaessons Trätjära AB\u003c\/em\u003e in Gothenburg. It is derived from the roots of resinous pine wood, ensuring pure, concentrated tar without any additives.\u003c\/p\u003e\n\u003cp\u003ePine tar has a very long tradition of wood protection — it has been used for over a thousand years in Scandinavia to protect wooden buildings, boats, and roofs. The product contains no solvents, biocides, or synthetic additives — just pure pine tar.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Furutjära?\u003c\/h2\u003e\n\u003cp\u003eWood exposed to sun, rain, and wind gradually loses some of its natural resins, becomes gray, and starts to crack. Pine tar deeply penetrates the wood and helps restore its natural protection while forming a durable protective layer. Natural pine tar has antiseptic and antibacterial properties that help protect wood against rot and mold.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% natural product:\u003c\/strong\u003e pure pine tar without any additional additives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural tone:\u003c\/strong\u003e brown to dark brown, which deepens and becomes more expressive over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep penetration:\u003c\/strong\u003e saturates the wood from within and enhances its resistance to moisture and mold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreathable coating:\u003c\/strong\u003e allows the wood to naturally regulate moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLongevity:\u003c\/strong\u003e reapplication is usually needed every 8–10 years depending on the surface's exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWooden facades and log houses\u003c\/li\u003e\n\u003cli\u003eWooden roofs (shingles, shake roofs)\u003c\/li\u003e\n\u003cli\u003eWood cladding and boards\u003c\/li\u003e\n\u003cli\u003eFences, utility buildings, and sheds\u003c\/li\u003e\n\u003cli\u003eRestoration of historical buildings\u003c\/li\u003e\n\u003cli\u003eImmersion of untreated wood before assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConditions:\u003c\/strong\u003e apply in dry, warm weather on completely dry wood. Before application, the tar needs to be heated in a water bath to ~50-60 °C — it becomes more fluid and absorbs better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e the surface must be clean, dry, and free from synthetic paints or varnishes. Dirty surfaces should be washed with linseed oil soap and water, then allowed to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e apply with a brush (a natural bristle brush is recommended). A sprayer can also be used, but the surface must then be worked over with a brush. Stir the tar regularly during work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e usually, 2 coats are needed. When applying the first coat, it is recommended to dilute the tar with balsam turpentine (10-20%) to improve absorption into dry wood.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eConsumption\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirst coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2–4 m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSecond coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4–8 m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eActual consumption depends on the type of wood, surface treatment, and weather conditions.\u003c\/p\u003e\n\u003ch2\u003eDrying time\u003c\/h2\u003e\n\u003cp\u003eFrom one day to several weeks — depending on temperature, sun, wind, and wood absorption capacity. The tar dries slowly, ensuring deep penetration.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSouth and west facades: reapply every ~8 years\u003c\/li\u003e\n\u003cli\u003eNorth and east facades: every ~10 years\u003c\/li\u003e\n\u003cli\u003eSurfaces not exposed to direct atmospheric effects may have a longer interval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCleaning\u003c\/h2\u003e\n\u003cp\u003eClean tools with \u003cstrong\u003ealcohol (ethanol)\u003c\/strong\u003e. Mineral spirits (white spirit) do not dissolve the tar. Tar can be washed off the skin with soap and warm water.\u003c\/p\u003e\n\u003ch2\u003eAdditional information\u003c\/h2\u003e\n\u003cp\u003eFurutjära is a natural product, so the tone and viscosity may slightly vary between batches. The final result largely depends on the type of wood — sawn wood absorbs more and appears darker than planed wood.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden\u003c\/em\u003e\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841462530395,"sku":"0103004","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"5 L","offer_id":52841462563163,"sku":"0103030","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/furutjara_1liter.jpg?v=1777205840"},{"product_id":"tjarolja-20-80","title":"Tar Oil Tjärolja 20\/80 - traditional wood protection for facades, terraces, fences, garden furniture, roofs","description":"\u003cp\u003e\u003cstrong\u003eNatural tar oil composed of pine tar and cold-pressed linseed oil. Suitable for terraces, facades, fences, garden furniture, boat docks, and wooden shingle roofs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTjärolja 20\/80 is a traditional wood protection product based on historically used ingredients that were widely applied in 19th-century Sweden for the protection of boats, shingle roofs, and facades. The product name reflects its composition: 20% pine tar and 80% cold-pressed linseed oil. It contains no solvents, added pigments, or synthetic additives. The oil penetrates the wood fibers, reduces moisture absorption, and forms a protective hydrophobic layer that helps preserve the wood structure.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Tjärolja 20\/80?\u003c\/h2\u003e\n\u003cp\u003eThis is a traditional oil-tar system that works on the principles of wood and oil interaction. Cold-pressed linseed oil penetrates the wood and polymerizes within its structure, while pine tar enhances surface hydrophobicity and reduces moisture ingress. The product contains no water, which could promote freeze-thaw damage, and no petroleum-based solvents. It consists of only two natural ingredients that have been used in wood protection for over a century.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application:\u003c\/strong\u003e suitable for terraces, facades, shingle roofs, boat docks, walkways, and garden furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep penetration, non-film forming:\u003c\/strong\u003e linseed oil penetrates wood pores, reducing drying and cracking without forming a surface film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e the surface wears gradually, so there is no need to remove the old layer before reapplication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural tone that changes over time:\u003c\/strong\u003e freshly applied coating gives wood a warm amber tone, which gradually transitions to a silvery gray under UV exposure, maintaining protective function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree from petroleum solvents, low VOC:\u003c\/strong\u003e VOC content below 200 g\/L (EU A\/e category limit 400 g\/L). Contains no benzene or aromatic hydrocarbons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e The surface must be clean, dry, and free of synthetic coatings. Dirty surfaces should be washed with linseed oil soap and water, then allowed to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaking:\u003c\/strong\u003e The product may separate. Shake thoroughly before use and stir regularly during application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply a thin layer with a brush in the direction of the wood grain. For dense wood, the oil can be gently heated in a water bath (30–40°C) to improve penetration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval of excess oil (mandatory for horizontal surfaces):\u003c\/strong\u003e after 20–30 minutes, remove excess oil with a clean cotton cloth. Excess oil can slow drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (optional):\u003c\/strong\u003e for very dry wood, a second coat may be applied after 24–48 hours once the first coat has dried.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry conditions when the temperature is at least +18°C. Avoid direct sunlight and strong winds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20% pine tar, 80% cold-pressed linseed oil. Contains no solvents, pigments, or synthetic additives.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAmber brown when applied; transitions to silvery gray over time under UV influence.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1030 kg\/m³ (+20°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLess than 200 g\/L (A\/e category, limit 400 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12–48 hours at +20°C. Lower temperatures and humidity may extend drying time.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor terraces, boat decks, walkways, docks, facades, fences, garden furniture, shingle roofs, poles, and log buildings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+5°C to +35°C, in a dry and cool place. Flash point 80°C — keep away from open flames.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden. Produced in small batches based on traditional tar oil formulas.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Contains linseed oil. Rags soaked in oil can spontaneously combust. After use, they should be immediately wetted with water or disposed of in a fireproof metal container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841462595931,"sku":"0111002","price":21.95,"currency_code":"EUR","in_stock":true},{"title":"5 L","offer_id":52841462628699,"sku":"0111030","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darva-ella.png?v=1779184465"},{"product_id":"silvertjara-altan","title":"Tar Paint Silvertjära Altan Silver Gray - natural protection for terraces, facades, garden furniture, fences","description":"\u003cp\u003e\u003cstrong\u003eSilver-gray, natural wood protective coating for planed wood surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSilvertjära is based on ancient Swedish tar oil traditions with over 1000 years of history. Silvertjära Altan is a modern version of tar oil made from traditional ingredients – pine tar, cold-pressed linseed oil, resin turpentine, and mineral pigments.\u003c\/p\u003e\n\u003cp\u003eIt penetrates the wood and forms a protective layer that reduces moisture ingress and helps preserve the wood's structure. The coating highlights the natural structure of the wood and develops a silver-gray tone over time.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Silvertjära?\u003c\/h2\u003e\n\u003cp\u003eMany modern facade paints and decking oils are water-based emulsions. If moisture penetrates the coating and the temperature drops below 0 °C, freeze-thaw cycles can promote wear and cracking of the coating.\u003c\/p\u003e\n\u003cp\u003eSilvertjära tar oil contains no water. The linseed oil in its composition penetrates the wood, while the pine tar and pigments form a protective layer that reduces moisture impact and helps protect the wood against rot, mold, pests, and UV radiation.\u003c\/p\u003e\n\u003cp\u003eSilvertjära uses a highly saturated tar oil system that provides a longer lifespan than conventional facade paints and decking oils. Thanks to its composition and penetration depth, it wears evenly and maintains its protective function for many years.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical coating:\u003c\/strong\u003e unlike synthetic coatings, usually one coat is sufficient. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps preserve wood structure:\u003c\/strong\u003e penetrates the surface and reduces wood fiber separation and further wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel:\u003c\/strong\u003e does not form a surface film but penetrates the wood, so it wears gradually and does not detach from the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide application:\u003c\/strong\u003e suitable for planed wood surfaces – decks, walkways, boat docks, facades, fences, and garden structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on impregnated wood:\u003c\/strong\u003e suitable for pressure-treated boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e The surface must be clean, dry, and free of synthetic coatings. Dirty surfaces are recommended to be washed with linseed oil soap and water. For new planed boards, a mixture of linseed oil and turpentine (1:1) can be used as a primer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Stir regularly before use and during work, as pigments may settle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply a thin layer with a brush in the direction of the wood grain. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval of excess oil (mandatory for horizontal surfaces):\u003c\/strong\u003e after 20–30 minutes, remove unabsorbed oil with a cloth. This step helps ensure even drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (optional):\u003c\/strong\u003e apply no sooner than after 48 hours if more intensive protection or tone is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry conditions above +18 °C, avoiding direct sunlight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNatural pine tar, cold-pressed linseed oil, natural resin turpentine, mineral pigments. Contains no petroleum-based solvents.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSilver-gray (vitriol gray)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 5 m²\/L for planed wood surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 days at +18 °C or more. Humidity and temperature can significantly affect drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDecks ~2–3 years; facades ~8–10 years depending on exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlammable (contains turpentine). Store in a cool place, away from heat sources.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden. Produced in small batches based on traditional tar oil formulas.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Materials containing linseed oil can self-ignite. Immediately dampen used cloths with water or dispose of them in a fireproof container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841462727003,"sku":"0181101","price":44.95,"currency_code":"EUR","in_stock":true},{"title":"3 L","offer_id":52841462759771,"sku":"0181103","price":109.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darvas-ellas-lazura-sudrabpeleka_1.png?v=1779185509"},{"product_id":"rod-roslagsmahogny","title":"Tar Paint Röd Roslagsmahogny Red Brown - natural protection for facades, fences, and garden furniture","description":"\u003cp\u003e\u003cstrong\u003eDeep red-brown glaze-like finish with a matte effect — highlights the natural texture of wood and gives a classic, elegant appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRöd Roslagsmahogny continues the centuries-old Swedish tar oil traditions. It has been widely used since the early 19th century, protecting the facades of buildings along the Roslagen coast and the Stockholm archipelago. The product's composition has not changed over time: \u003cstrong\u003epine tar, cold-pressed linseed oil, and balsam turpentine\u003c\/strong\u003e, with the addition of natural red iron oxide pigment. Free from petroleum-based solvents and synthetic additives. The result is a deep red-brown, matte finish with a glaze-like effect that highlights the natural grain of the wood.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Röd Roslagsmahogny?\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSynthetic paints often form a film layer on the wood surface, which cracks and peels over time. Svart Roslagsmahogny works differently — the linseed oil in its composition deeply \u003cmeta charset=\"utf-8\"\u003epenetrates the wood, while the pine tar with added pigment fills micro-cracks and provides protection against moisture, rot, pests, and UV radiation.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical:\u003c\/strong\u003e unlike many synthetic paints, one coat is usually \u003cstrong\u003esufficient for full protection against moisture and mold.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic Swedish red tone:\u003c\/strong\u003e glaze-like pigmentation with natural red iron oxide pigment gives the wood a deep red-brown tone while maintaining its visible natural texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte surface:\u003c\/strong\u003e does not create shine — no \"plastic\" or \"lacquered\" effect typical of synthetic paints and varnishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for various surfaces:\u003c\/strong\u003e suitable for both planed and sawn wood — facades, log houses, fences, and garden furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow consumption:\u003c\/strong\u003e 6–10 m²\/L depending on the wood's absorption capacity and surface type (sawn or planed).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel or crack:\u003c\/strong\u003e does not form a covering film — the oil deeply penetrates the wood pores, creating a durable protective layer. The surface wears evenly, and no removal of the old layer is needed for renewal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e the surface must be clean, dry, and free from synthetic paints or varnishes. It is recommended to wash dirty surfaces with linseed oil soap and water, then allow to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e the product contains natural iron oxide pigment, which may settle. Stir thoroughly before use and periodically during work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e apply in a thin, even layer with a brush in the direction of the wood grain. Work in widths of 2–3 boards to avoid visible transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (if necessary):\u003c\/strong\u003e for a deeper tone, apply after 24–48 hours when the first coat is completely dry. In most cases, one coat is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry weather when the air and surface temperature is at least +18°C. Avoid direct sunlight and precipitation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePine tar, cold-pressed linseed oil, balsam turpentine, natural red iron oxide pigment. Contains no petroleum-based solvents or synthetic additives.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep red-brown with a glaze-like effect — the wood texture remains visible. The finish becomes matte after drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6–10 m²\/L depending on the type and condition of the wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 g\/cm³ (+20°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 250 g\/L (category A\/f, EU limit value 700 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAt +18°C — 24–48 hours. At lower temperatures and higher humidity, drying time may significantly increase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWood facades, log houses, fences, garden furniture, utility buildings, and sheds. Suitable for planed and sawn wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCan add tar for a denser coating or dilute with linseed oil or balsam turpentine to improve absorption in dense wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStore at +5°C to +35°C in a tightly sealed container.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e rags soaked in linseed oil can spontaneously combust — after use, dampen with water or store in a metal container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841462792539,"sku":"0163002","price":29.95,"currency_code":"EUR","in_stock":true},{"title":"5 L","offer_id":52841462825307,"sku":"0163005","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darvas-ellas-lazura-sarkana.png?v=1779184383"},{"product_id":"svart-roslagsmahogny","title":"Tar Paint Svart Roslagsmahogny Black - long-lasting protection for facades, fences, and garden furniture","description":"\u003cp\u003e\u003cstrong\u003eBlack glaze-like finish with a matte effect — highlights the natural texture of wood and gives a classic, elegant appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSvart Roslagsmahogny continues the centuries-old Swedish tar oil traditions. It has been widely used since the early 19th century, protecting the facades of buildings along the Roslagen coast and the Stockholm archipelago. The product's composition has not changed over time: \u003cstrong\u003epine tar, cold-pressed linseed oil, and balsam turpentine\u003c\/strong\u003e, with added black iron oxide pigment. Free from petroleum-based solvents and synthetic additives. The result is a deep black, matte finish with a glaze-like effect that highlights the natural grain of the wood.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Svart Roslagsmahogny?\u003c\/h2\u003e\n\u003cp\u003eSynthetic paints often form a film layer on the wood surface, which cracks and peels over time. Svart Roslagsmahogny works differently — the linseed oil in its composition deeply penetrates the wood, while the pine tar with added pigment fills micro-cracks and provides protection against moisture, rot, pests, and UV radiation.\u003c\/p\u003e\n\u003cp\u003eMain advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical:\u003c\/strong\u003e unlike many synthetic paints, a single coat is usually \u003cstrong\u003esufficient for full protection against moisture and mold.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte surface:\u003c\/strong\u003e does not create a shine — lacks the “plastic” or “lacquered” effect typical of synthetic paints and varnishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for various surfaces:\u003c\/strong\u003e works on both planed and sawn wood — facades, log houses, fences, and garden furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow consumption:\u003c\/strong\u003e 6–10 m²\/L depending on the wood's absorption capacity and surface type (sawn or planed).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel or crack:\u003c\/strong\u003e does not form a covering film — the oil deeply penetrates the wood pores, creating a durable protective layer. The surface wears evenly, and no removal of the old layer is needed for renewal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e the surface must be clean, dry, and free from synthetic paints or varnishes. Dirty surfaces should be washed with linseed oil soap and water, then allowed to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e the product contains natural iron oxide pigment, which may settle. Stir thoroughly before use and periodically during work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e apply in a thin, even layer with a brush in the direction of the wood grain. Work in widths of 2–3 boards to avoid visible transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (if necessary):\u003c\/strong\u003e for a deeper tone, apply after 24–48 hours when the first coat is completely dry. In most cases, one coat is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry weather when the air and surface temperature is at least +18°C. Avoid direct sunlight and precipitation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePine tar, cold-pressed linseed oil, balsam turpentine, natural black iron oxide pigment. Contains no petroleum-based solvents or synthetic additives.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep black with a glaze-like effect — the wood texture remains visible. The finish becomes matte after drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6–10 m²\/L depending on the type and condition of the wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 g\/cm³ (+20°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 250 g\/L (category A\/f, EU limit value 700 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAt +18°C — 24–48 hours. At lower temperatures and higher humidity, drying time may significantly increase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWood facades, log houses, fences, garden furniture, utility buildings, and sheds. Suitable for planed and sawn wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCan add tar for a denser coating or dilute with linseed oil or balsam turpentine to improve absorption in dense wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStore at +5°C to +35°C in a tightly sealed container.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden. The product is made in small batches, preserving 19th-century craftsmanship traditions.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e rags soaked in linseed oil can spontaneously combust — after use, dampen with water or store in a metal container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841462858075,"sku":"0163012","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"5 L","offer_id":52841462890843,"sku":"0163015","price":114.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darva-ellas-lazura-melna.png?v=1779184195"},{"product_id":"gum-turpentine","title":"Natural pine resin turpentine (balsam turpentine)","description":"\u003cp\u003e\u003cstrong\u003e100% plant-based, distilled from pine resin. A traditional solvent and drying accelerator for linseed oil and tar products.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClaessons balsam turpentine is pure pine turpentine oil obtained by distilling natural pine resin. Unlike mineral solvents or white spirit, it is a fully renewable, plant-based product that has been used for centuries in traditional construction.\u003c\/p\u003e\n\u003ch2\u003eWhy use natural turpentine?\u003c\/h2\u003e\n\u003cp\u003ePure turpentine has a unique property – it both attracts and releases oxygen, allowing it to act as a natural drying accelerator in linseed oil and tar products, especially in areas with limited air access. Additionally, it reduces viscosity, allowing tar and oil to penetrate deeper into wood fibers.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor thinning linseed oil products and regulating viscosity\u003c\/li\u003e\n\u003cli\u003eFor thinning tar, ensuring better absorption and faster drying\u003c\/li\u003e\n\u003cli\u003eFor cleaning brushes and tools after working with linseed oil paints, oils, and tar\u003c\/li\u003e\n\u003cli\u003eSolvent for shellac, damar varnish, and resins in restoration work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% pine turpentine oil (CAS 8006-64-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlant-based, from pine resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eColorless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOdor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCharacteristic pine resin smell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.860 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBoiling Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150–170 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlash Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolubility in Water\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePractically insoluble\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5–35 °C, in a tightly sealed container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eBalsam turpentine is a highly flammable liquid. Harmful if swallowed, in contact with skin, or inhaled. May cause an allergic reaction. Use in well-ventilated areas, avoid open flames and sparks. Use protective gloves and eye protection. Keep out of reach of children.\u003c\/p\u003e\n\u003cp\u003eDo not pour into drains – hazardous to aquatic organisms. Dispose of as hazardous waste.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ Important:\u003c\/strong\u003e Rags soaked with linseed oil or turpentine can spontaneously combust. After use, immerse them in water.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":52841463939419,"sku":"0209002","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/balsamterpentin_1liter.jpg?v=1777207747"},{"product_id":"darvas-krasa-silvertjara-altan-sudrabpeleka-dabiga-aizsardziba-tersem-fasadem-darza-mebelem-zogiem-copy","title":"Tar Paint Silvertjära Altan Silver Gray - natural protection for terraces, facades, garden furniture, fences (DAMAGED PACKAGING)","description":"\u003cp\u003e\u003cstrong\u003eSilver-gray, natural wood protective coating for planed wood surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSilvertjära is based on ancient Swedish tar oil traditions with over 1000 years of history. Silvertjära Altan is a modern version of tar oil made from traditional ingredients – pine tar, cold-pressed linseed oil, resin turpentine, and mineral pigments.\u003c\/p\u003e\n\u003cp\u003eIt penetrates the wood and forms a protective layer that reduces moisture ingress and helps preserve the wood's structure. The coating highlights the natural structure of the wood and develops a silver-gray tone over time.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Silvertjära?\u003c\/h2\u003e\n\u003cp\u003eMany modern facade paints and decking oils are water-based emulsions. If moisture penetrates the coating and the temperature drops below 0 °C, freeze-thaw cycles can promote wear and cracking of the coating.\u003c\/p\u003e\n\u003cp\u003eSilvertjära tar oil contains no water. The linseed oil in its composition penetrates the wood, while the pine tar and pigments form a protective layer that reduces moisture impact and helps protect the wood against rot, mold, pests, and UV radiation.\u003c\/p\u003e\n\u003cp\u003eSilvertjära uses a highly saturated tar oil system that provides a longer lifespan than conventional facade paints and decking oils. Thanks to its composition and penetration depth, it wears evenly and maintains its protective function for many years.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical coating:\u003c\/strong\u003e unlike synthetic coatings, usually one coat is sufficient. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps preserve wood structure:\u003c\/strong\u003e penetrates the surface and reduces wood fiber separation and further wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel:\u003c\/strong\u003e does not form a surface film but penetrates the wood, so it wears gradually and does not detach from the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide application:\u003c\/strong\u003e suitable for planed wood surfaces – decks, walkways, boat docks, facades, fences, and garden structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on impregnated wood:\u003c\/strong\u003e suitable for pressure-treated boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e The surface must be clean, dry, and free of synthetic coatings. Dirty surfaces are recommended to be washed with linseed oil soap and water. For new planed boards, a mixture of linseed oil and turpentine (1:1) can be used as a primer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Stir regularly before use and during work, as pigments may settle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply a thin layer with a brush in the direction of the wood grain. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval of excess oil (mandatory for horizontal surfaces):\u003c\/strong\u003e after 20–30 minutes, remove unabsorbed oil with a cloth. This step helps ensure even drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (optional):\u003c\/strong\u003e apply no sooner than after 48 hours if more intensive protection or tone is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry conditions above +18 °C, avoiding direct sunlight.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNatural pine tar, cold-pressed linseed oil, natural resin turpentine, mineral pigments. Contains no petroleum-based solvents.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSilver-gray (vitriol gray)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 5 m²\/L for planed wood surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1–2 days at +18 °C or more. Humidity and temperature can significantly affect drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDecks ~2–3 years; facades ~8–10 years depending on exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlammable (contains turpentine). Store in a cool place, away from heat sources.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden. Produced in small batches based on traditional tar oil formulas.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Materials containing linseed oil can self-ignite. Immediately dampen used cloths with water or dispose of them in a fireproof container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":53065637626203,"sku":"0181101","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"3 L","offer_id":53065637658971,"sku":"0181103","price":76.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darvas-ellas-lazura-sudrabpeleka_1.png?v=1779185509"},{"product_id":"darvas-krasa-svart-roslagsmahogny-melna-ilgstosa-aizsardziba-fasadem-zogem-un-darza-mebelem-copy","title":"Tar Paint Svart Roslagsmahogny Black - long-lasting protection for facades, fences, and garden furniture (DAMAGED PACKAGING)","description":"\u003cp\u003e\u003cstrong\u003eBlack glaze-like finish with a matte effect — highlights the natural texture of wood and gives a classic, elegant appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSvart Roslagsmahogny continues the centuries-old Swedish tar oil traditions. It has been widely used since the early 19th century, protecting the facades of buildings along the Roslagen coast and the Stockholm archipelago. The product's composition has not changed over time: \u003cstrong\u003epine tar, cold-pressed linseed oil, and balsam turpentine\u003c\/strong\u003e, with added black iron oxide pigment. Free from petroleum-based solvents and synthetic additives. The result is a deep black, matte finish with a glaze-like effect that highlights the natural grain of the wood.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Svart Roslagsmahogny?\u003c\/h2\u003e\n\u003cp\u003eSynthetic paints often form a film layer on the wood surface, which cracks and peels over time. Svart Roslagsmahogny works differently — the linseed oil in its composition deeply penetrates the wood, while the pine tar with added pigment fills micro-cracks and provides protection against moisture, rot, pests, and UV radiation.\u003c\/p\u003e\n\u003cp\u003eMain advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical:\u003c\/strong\u003e unlike many synthetic paints, a single coat is usually \u003cstrong\u003esufficient for full protection against moisture and mold.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte surface:\u003c\/strong\u003e does not create a shine — lacks the “plastic” or “lacquered” effect typical of synthetic paints and varnishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for various surfaces:\u003c\/strong\u003e works on both planed and sawn wood — facades, log houses, fences, and garden furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow consumption:\u003c\/strong\u003e 6–10 m²\/L depending on the wood's absorption capacity and surface type (sawn or planed).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel or crack:\u003c\/strong\u003e does not form a covering film — the oil deeply penetrates the wood pores, creating a durable protective layer. The surface wears evenly, and no removal of the old layer is needed for renewal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e the surface must be clean, dry, and free from synthetic paints or varnishes. Dirty surfaces should be washed with linseed oil soap and water, then allowed to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e the product contains natural iron oxide pigment, which may settle. Stir thoroughly before use and periodically during work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e apply in a thin, even layer with a brush in the direction of the wood grain. Work in widths of 2–3 boards to avoid visible transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (if necessary):\u003c\/strong\u003e for a deeper tone, apply after 24–48 hours when the first coat is completely dry. In most cases, one coat is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry weather when the air and surface temperature is at least +18°C. Avoid direct sunlight and precipitation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePine tar, cold-pressed linseed oil, balsam turpentine, natural black iron oxide pigment. Contains no petroleum-based solvents or synthetic additives.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep black with a glaze-like effect — the wood texture remains visible. The finish becomes matte after drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6–10 m²\/L depending on the type and condition of the wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 g\/cm³ (+20°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 250 g\/L (category A\/f, EU limit value 700 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAt +18°C — 24–48 hours. At lower temperatures and higher humidity, drying time may significantly increase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWood facades, log houses, fences, garden furniture, utility buildings, and sheds. Suitable for planed and sawn wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCan add tar for a denser coating or dilute with linseed oil or balsam turpentine to improve absorption in dense wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStore at +5°C to +35°C in a tightly sealed container.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden. The product is made in small batches, preserving 19th-century craftsmanship traditions.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e rags soaked in linseed oil can spontaneously combust — after use, dampen with water or store in a metal container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"1 L","offer_id":53065653715291,"sku":"0163012","price":19.57,"currency_code":"EUR","in_stock":true},{"title":"5 L","offer_id":53065653748059,"sku":"0163015","price":78.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darva-ellas-lazura-melna.png?v=1779184195"},{"product_id":"darvas-krasa-rod-roslagsmahogny-sarkanbruna-dabiga-aizsardziba-fasadem-zogem-un-darza-mebelem-copy","title":"Tar Paint Röd Roslagsmahogny Red Brown - natural protection for facades, fences, and garden furniture (DAMAGED PACKAGING)","description":"\u003cp\u003e\u003cstrong\u003eDeep red-brown glaze-like finish with a matte effect — highlights the natural texture of wood and gives a classic, elegant appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRöd Roslagsmahogny continues the centuries-old Swedish tar oil traditions. It has been widely used since the early 19th century, protecting the facades of buildings along the Roslagen coast and the Stockholm archipelago. The product's composition has not changed over time: \u003cstrong\u003epine tar, cold-pressed linseed oil, and balsam turpentine\u003c\/strong\u003e, with the addition of natural red iron oxide pigment. Free from petroleum-based solvents and synthetic additives. The result is a deep red-brown, matte finish with a glaze-like effect that highlights the natural grain of the wood.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Röd Roslagsmahogny?\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSynthetic paints often form a film layer on the wood surface, which cracks and peels over time. Svart Roslagsmahogny works differently — the linseed oil in its composition deeply \u003cmeta charset=\"utf-8\"\u003epenetrates the wood, while the pine tar with added pigment fills micro-cracks and provides protection against moisture, rot, pests, and UV radiation.\u003c\/p\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEconomical:\u003c\/strong\u003e unlike many synthetic paints, one coat is usually \u003cstrong\u003esufficient for full protection against moisture and mold.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic Swedish red tone:\u003c\/strong\u003e glaze-like pigmentation with natural red iron oxide pigment gives the wood a deep red-brown tone while maintaining its visible natural texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte surface:\u003c\/strong\u003e does not create shine — no \"plastic\" or \"lacquered\" effect typical of synthetic paints and varnishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for various surfaces:\u003c\/strong\u003e suitable for both planed and sawn wood — facades, log houses, fences, and garden furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow consumption:\u003c\/strong\u003e 6–10 m²\/L depending on the wood's absorption capacity and surface type (sawn or planed).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not peel or crack:\u003c\/strong\u003e does not form a covering film — the oil deeply penetrates the wood pores, creating a durable protective layer. The surface wears evenly, and no removal of the old layer is needed for renewal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e the surface must be clean, dry, and free from synthetic paints or varnishes. It is recommended to wash dirty surfaces with linseed oil soap and water, then allow to dry completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e the product contains natural iron oxide pigment, which may settle. Stir thoroughly before use and periodically during work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e apply in a thin, even layer with a brush in the direction of the wood grain. Work in widths of 2–3 boards to avoid visible transitions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat (if necessary):\u003c\/strong\u003e for a deeper tone, apply after 24–48 hours when the first coat is completely dry. In most cases, one coat is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature:\u003c\/strong\u003e apply in dry weather when the air and surface temperature is at least +18°C. Avoid direct sunlight and precipitation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eTechnical information:\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePine tar, cold-pressed linseed oil, balsam turpentine, natural red iron oxide pigment. Contains no petroleum-based solvents or synthetic additives.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep red-brown with a glaze-like effect — the wood texture remains visible. The finish becomes matte after drying.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6–10 m²\/L depending on the type and condition of the wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDensity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 g\/cm³ (+20°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 250 g\/L (category A\/f, EU limit value 700 g\/L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAt +18°C — 24–48 hours. At lower temperatures and higher humidity, drying time may significantly increase.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWood facades, log houses, fences, garden furniture, utility buildings, and sheds. Suitable for planed and sawn wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCan add tar for a denser coating or dilute with linseed oil or balsam turpentine to improve absorption in dense wood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStore at +5°C to +35°C in a tightly sealed container.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Claessons Trätjära AB, Gothenburg, Sweden.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e rags soaked in linseed oil can spontaneously combust — after use, dampen with water or store in a metal container.\u003c\/p\u003e","brand":"Linoljeprodukter","offers":[{"title":"5 L","offer_id":53065660563803,"sku":"0163005","price":90.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/files\/darvas-ellas-lazura-sarkana.png?v=1779184383"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0844\/0918\/8699\/collections\/silver-tar-pigmented_6e3964db-1572-466a-b0f2-654dd854ee87.webp?v=1779188914","url":"https:\/\/www.ekokrasas.lv\/en\/collections\/darvas-ellas-produkt.oembed","provider":"Eko Krāsas","version":"1.0","type":"link"}